INSPECT THEATRICAL TRUSS – A Must!
Link to Tyler Truss Inspection Guidelines 2026
https://tylertruss.com/wp-content/uploads/2026/07/TRUSS-INSPECTION-GUIDELINES-2026.pdf
Inspect Your Truss! It has a lifespan. But more importantly, it is about safety. When you consider that it rides above concert and other live event stages and seating areas, venues such as museums and more…safety is paramount. So how do you inspect your truss and what are you looking for? Above all, start with exploring the ANSI E1.2 guidelines and engineering recommendations.

ANSI E1.2 is ESTA’s Approved and Published Technical Standards Program Standards. The American National Standards Institute oversees standards and conformity assessment activities in the UNITED STATES.

So, what is ESTA? It is the Entertainment Services and Technology Association, a non-profit U.S. trade association for the entertainment technology industry. Its members are the industry’s leading dealers, manufacturers, production companies, rental companies, and professional service companies. ESTA’s members are responsible for creating many of the most important programs in our industry including the Technical Standards Program, Entertainment Technician Certification Program and Rental Guard.
ESTA does not approve, inspect, or certify any installations, procedures, equipment, or materials for compliance with codes, recommended practices, or standards. Compliance with an ESTA standard or recommended practice, or an American National Standard developed by ESTA, is the sole and exclusive responsibility of the manufacturer or provider and is entirely within their control and discretion,
The ESTA Technical Standards Program was created to serve ESTA’s membership and the entertainment industry in technical standards related matters. The goal of the Program is to take a leading role regarding technology within the entertainment industry by creating recommended practices and standards, monitoring standards issues around the world on behalf of our members, and improving communications and safety within the industry. ESTA works closely with the technical standards efforts of other organizations within the industry, including USITT, and VPLT. USITT was founded in 1960 as an organization to promote dialogue, research, and learning among practitioners of theatre design and technology. Today it has grown to include members at all levels of their careers and has embraced new technologies being used in entertainment today. USITT is now the leader in life-long learning opportunities for the entertainment design and technology industry.
And just what are you looking for…

- Wear and elongation of bolt holes on end plates
- Gouges and Bends
- Holes or cut marks other than those that came from the manufacturer
- Dents, Scrapes
- Loose fork end connections
- Forks that are warped, bent or corroded
- Clevis Pin elongation or wear
- Missing or loose-fitting coil pins
- Holes drilled ‘after’ purchasing from the manufacturer
- Damaged or missing diags, verticals or horizontals
- Is the truss square. If more than ¼” out of square, remove from service
- Check all truss and towers to see if they are twisted, bent or bowed
- Welds! Any cracked or orange peel and cracks welds, remove from service
- Weld gouges or abrasions deeper than 50%? Remove from service


For assistance, please call the manufacturer/provider of the truss brand that you own. You might reach out to Esta as well. ESTA – Visit: https://esta.org/ – Contacts: https://esta.org/ESTA/staff.html
Note: Tyler Truss only inspects and repairs “Tyler” product. Link to Tyler Truss Inspection Guidelines 2026 T:\Quality\Master Forms\TRUSS INSPECTION GUIDELINES 2026.pdf